Many engineers have not discovered this, but a contractor taught me that it is very unwieldy for us to place the most important part of a sheet, namely the plan view, near the staples. When the wind is blowing on a project site, the less a plan has to be unrolled, the better. So it is always best for us to place the most important part of plan sheets far from the staple/binding edge.
This means the plan view should always be as far right as possible on our plans.
No comments:
Post a Comment
Spammers, don't waste your time. If you need honorable work, let's brainstorm. Do you see any spam comments here? No. That's because you won't get through. I personally review every comment.
Real folks, thanks for commenting!