Wednesday, July 8, 2009

Civil 3D Mid-ordinate Distance Part 2--Changing Default

In Part 1 I explained why you may need to use a smaller mid-ordinate distance when you Add Feature Lines as Breaklines to a surface. You may want to change the Civil 3D default mid-ordinate distance. The image below shows how you can change the default distance in AutoCAD Civil 3D 2010 using the Toolspace (ShowTS command)



I hope that's helpful.

Tom Haws
Hubbard Engineering
at

2 comments:

  1. Dave MassingaleJuly 13, 2009 at 10:51 AM

    I don't see this setting in 2009, does it exist somewhere else?

    ReplyDelete
  2. Thomas Gail HawsJuly 13, 2009 at 11:07 AM

    I read somewhere it is new in 2010. Sorry. Install the new version. :-)

    ReplyDelete

Spammers, don't waste your time. If you need honorable work, let's brainstorm. Do you see any spam comments here? No. That's because you won't get through. I personally review every comment.

Real folks, thanks for commenting!